Cleaning; Basic Configuration; Installation Of The Pedals; Installation Of The Handlebar - BH ATOM CROSS PRO Notice

DE
AR

3.8 Cleaning.

To achieve good maintenance of the bicycle, we recommend that
ZH
you comply with the following basic preventive measures:
ZH
■ Clean the dust and mud with a damp sponge and a neutral
cleaning product
DK
■ Plastic parts should only be cleaned with soapy water.
EN
■ Tyres can be cleaned with a sponge or brush and soapy water.
(
UK)
■ After cleaning the bicycle, completely dry it using an absorbent
EN
(
cloth.
US)
■ After each cleaning, you should lubricate the transmission
FR
components.
EN
(
UK)
IT
IMPORTANT WARNING
At all times avoid using pressurized cleaning devices, power washers
JA
and never use steam jet cleaning devices.
KO
NL
RU
SV
CE
44
UK
4 BASIC CONFIGURATION.
4.1 Installation of the pedalss.

4.2 Installation of the handlebar.

4.2.1 Aheadset® Steering set settings
(Aheadset® is the brand logo of threadless systems made by
DiaCompe).
This steering set system stands out because the front part does not
fit into the fork tube, but it is fixed from the outside (a). The front part
also is an important part of the steering bearing. Its locking fixes the
fork assembly. To assemble the Aheadset®, you will need one or two
Allen keys and a torque spanner. Undo the two side torque screw/s
two or three turns of the head stem. Tighten the upper top screw with
an Allen key, e.g. a quarter of a turn (b).
Right pedal: 'R' stamped on its
axel indicates the right pedal.
Tighten the screws in clockwise
direction.
Left pedal: 'L' stamped on its
axel indicates the left pedal.
Tighten the screws in anti-
clockwise direction. Grease the
threads of the pedals.
.
®