Warning Instructions For Use; Before Making Your First Trip; Before Each Trip - BH ATOM CROSS PRO Notice

DE
AR 3 WARNING INSTRUCTIONS FOR
USE.
ZH
3.1 Before making your first trip.
ZH
1. 1. Only use the bicycle for its designed intention, otherwise,
DK
there is a risk that the bicycle is not sufficient and can fail. Falling
hazards!
EN
(
UK)
2. 2. Are you familiarized with the braking system? Check that
the front wheel brake is activated with the same lever you are used
EN
( to (right or left). If that is not the case, you should be accustomed to
US)
the new situation, because if you unwillingly activate the front wheel
brake, you could cause a fall. You can also ask your local BH dealer
FR
to modify the brake lever.
EN
Modern brakes are much improved with greater braking effect.
(
UK)
So try your brakes on a flat anti-skid surface off the road to get
accustomed to them.
IT
You will find more information in the section denominated
JA
«Brake system»
Take into account that the braking distance is greater when
KO
cycling with a handlebar with couplings. This position
impedes clear activation of the brake levers.
NL
3. 3. Do you know the transmission system well and how it
works? If necessary, get familiarized with the new system on a
RU
traffic-free road.
SV You will find more information in the section titled
«Traction»
4. Are the saddle and handlebar adjusted correctly (height and
reach)? Check that you can reach the floor with the tip of your toes
CE
40
UK
when sitting on the saddle. Your local BH workshop can help you if
are not satisfied with the position of the saddle.
Also, take into account that you have enough freedom of
movement, to avoid any injuries when trying to make a
quick dismount.
5. If the bike has clip type or automatic pedals, firstly get familiarized
with the locking and unlocking process while you are stopped.
Carefully read the instruction for use of the pedals as supplied by
your local BH workshop..
If movement is restricted and/or the settings of automatic
pedals is too rigid, you may not be able free yourself from
the pedals! Falling hazards!
6. IF you have acquired a bicycle with rear suspension, it is better that
your local BH workshop adjusts the frame at the time of delivery or if
the purchase was made from www.bhbikes.com, it should be done in
any cycled workshop you trust. Inadequate settings of the suspension
can cause a malfunction or damage to the suspension. In any case,
performance will drop and you will not attain maximum safety during
the cycle.

3.2 Before each trip.

Your bicycle will be inspected repeatedly during its manufacture
and then, a final inspection by your local BH workshop. Because the
operation of the bicycle can be modified during transport or it could
be that third parties may have modified your bicycle during waiting
time, you should check the following before each trip: