Attaching The Pedi-Mate Infant Restraint System - Stryker Power-PRO TL Manuel D'utilisation Et D'entretien

English
ATTACHING THE PEDI-MATE
See the Pedi-Mate
Pedi-Mate ® Infant Restraint System.
To secure the Pedi-Mate
1. Remove any restraints that are already attached to the cot.
2. Raise the cot backrest to the full upright position.
3. Position the Pedi-Mate
4. Wrap the straps around the backrest and insert the ends of the straps through the brackets. Securely fasten the
buckle as shown in Figure 32.2.
WARNING
To avoid accidental release of the Pedi-Mate
from obstructions on the cot or accessories.
Return To Table of Contents
1-50
Optional Accessories
® INFANT RESTRAINT SYSTEM
users manual for the manufacturer's recommendations for the use, operation and care of the
®
to the cot:
®
® pad flat on the backrest with the black backrest straps out as shown in Figure 32.1.
Figure 32.1: Positioning the Pedi-Mate
Figure 32.2: Fastening the Pedi-Mate
® , and possible injury to the infant, ensure that the buckle is located away
®
Buckle
®
6550-109-005 REV A www.stryker.com