Using The Hour Meter - Stryker Power-PRO TL Manuel D'utilisation Et D'entretien

English

USING THE HOUR METER

The hour meter, located on the foot end control enclosure as shown in Figure 19, indicates the amount of time
(HHH.H hours) that the cot has been in use under power. You can use the hour meter to determine the frequency for
preventative maintenance procedures as listed on
A
Return To Table of Contents
1-36
Operation Guide
page 1-56.
Figure 19: Hour Meter
6550-109-005 REV A www.stryker.com