Stryker Power-PRO TL Manuel D'utilisation Et D'entretien page 53

ATTACHING THE PEDI-MATE
5. Pull firmly on the end of the adjustable backrest strap and tighten it securely.
6. Insert the mainframe straps between the cot frame and the mattress. To ensure that the release button is located
toward the foot end of the cot, insert the buckle behind the litter cross brace and bring it up in front of the cross
brace. Secure the buckle around the cross brace, leaving a little slack in the strap for final adjustment as shown
in Figure 32.3.
WARNING
To avoid accidental release of the Pedi-Mate
from obstructions on the cot or accessories.
7. Verify that all of the straps are snug and fastened securely as shown in Figure 32.4.
Note: These are general instructions for installation of the Pedi-Mate
at the discretion of the user. Stryker recommends that all users be trained on the proper use of the Pedi-Mate
using it in an actual situation. Retain these instructions for future reference. Include them with the product in the event
of transfer to new users.
Pedi-Mate ® is a registered trademark of Ferno-Washington, Inc.
www.stryker.com
Optional Accessories
® INFANT RESTRAINT SYSTEM (CONTINUED)
Figure 32.3: Securing the Safety Restraints on a Cot
® , and possible injury to the infant, ensure that the buckle is located away
Figure 32.4: Pedi-Mate ®
6550-109-005 REV A
Strapped to a Cot
. Safe and proper use of the Pedi-Mate
®
is solely
®
® before
Return To Table of Contents
1-51
English