LOADING AND UNLOADING THE COT USING THE OPTIONAL OXYGEN BOTTLE HOLDER
To load and unload the cot with the optional oxygen bottle holder, attach the winch cable to the winch attachment rod
(A) as shown in Figure 14.
The length of the loading ramp should be at least 8.5 feet. Verify the ramp can support the weight of the cot, patient
and equipment.
Note:
• With the cot in the lowest position, the optional oxygen bottle holder can be used to load patients weighing up to
50 stones (318 kg) (700 lb).
• Proper inspection and maintenance of the optioanl oxygen bottle holder accessory should be followed as identified
in the Preventative Maintenance Checklist (see
www.stryker.com
Cot Operation
Figure 14: Winch Attachment Rod
page
1-56).
6550-109-005 REV A
A
Return To Table of Contents
1-29
English