Removing The Cot From The Fastener - Stryker Power-PRO TL Manuel D'utilisation Et D'entretien

REMOVING THE COT FROM THE FASTENER

To remove the cot from the fastener:
1. Press down firmly on the foot pedal until the locking mechanism disengages as shown in Figure 8.
2. Roll the cot out of the patient compartment as shown in Figure 9.
Figure 8: Press Foot End
www.stryker.com
Operation Guide
6550-109-005 REV A
Figure 9: Remove Cot
Return To Table of Contents
English
1-23