Attaching The Pedi-Mate® Infant Restraint System - Stryker Power-PRO XT 6500 Manuel D'utilisation Et D'entretien

English
ATTAChING ThE PEDI-MATE® INFANT RESTRAINT SySTEM
See the Pedi-Mate® users manual for the manufacturer's recommendations for the use, operation and care of the
Pedi-Mate® Infant Restraint System.
To secure the Pedi-Mate® to the cot:
1. Remove any restraints that are already attached to the cot.
2. Raise the cot backrest to the full upright position.
3. Position the Pedi-Mate® pad flat on the backrest with the black backrest straps out (see Figure 52.1).
4. Wrap the straps around the backrest and insert the ends of the straps through the brackets. Securely fasten the
buckle (see Figure 52.2).
WARNING
To avoid accidental release of the Pedi-Mate®, and possible injury to the infant, ensure that the buckle is located away
from obstructions on the cot or accessories.
Return To Table of Contents
1-60
Optional Accessories
Figure 52.1: Positioning the Pedi-Mate®
Figure 52.2: Fastening the Pedi-Mate® Buckle
6500-109-005 REV A www.stryker.com