Removal Of Excess Air From The Hydraulic System - Stryker 1089 Manuel D'entretien

REMOVAL OF EXCESS AIR FROM THE HYDRAULIC SYSTEM

Tools Required:
• None
Procedure:
1 . Verify that all hydraulic linkages are secure and operating properly .
2 . Raise the litter to its highest height .
3 . Continue to pump the pedal several times to force the air through the system .
4 . Verify proper operation before returning the unit to service .
www.stryker.com
Service Information
1089-009-006 REV G
Return To Table of Contents
1-27
English