Stimulation Level Control - Boston Scientific Precision SC-5213 Manuel D'utilisation

Masquer les pouces Voir aussi pour Precision SC-5213:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Precision™ SCS System with MultiWave Technology Patient System Handbook
The Remote Control unit is your direct link to choices available for tailoring spinal cord stimulation to suit your comfort and
convenience requirements. Keep the Remote Control with you at all times.
Note:
Remember, the Level screen will remain on the display for approximately one minute if you do not press a button to perform
an action with the Remote Control. After a minute, the Remote Control will go into idle mode and the display will go blank.
• Multiple area control is available only if your Stimulator is programmed to operate at frequencies of 1,200Hz or below and
if your system has been programmed to deliver stimulation to separate areas. If you do not have separate area control (for
example, left leg vs. right leg) but feel that separate control might improve your therapy, contact your healthcare professional
to determine what is possible.

Stimulation Level Control

Occasionally, you may see one of the accompanying messages on the Remote Control screen while changing the stimulation level.
These displays, and a "beep" from the Remote Control, alert you that you have reached either a maximum or a minimum level:
Patient System Handbook
90868426-08 REV A 16 of 213

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Precision sc-5305Precision sc-5312

Table des Matières