Selecting and Activating Programs
P
1. Press the
button from the Level screen to go to the Program screen.
From the Program screen, each additional
program number. The black highlight box shows where you are in the cycle. Pressing
screen. Pressing
from program 1 also returns you to the Level screen.
"
P
2. Press
or
to move until the program you want is highlighted, then press p to activate the program.
"
Note: You might not have four programs saved in your Remote Control. Empty program slots will have a blank box with no program
number. If you try to activate an empty program, nothing will happen.
P
button press selects the next program number. Press
The Remote Control
to select the previous
"
P
from program 4 returns you to the Level
Patient System Handbook
90868426-08 REV A 19 of 213