Turning Stimulation On And Off For Individual Areas - Boston Scientific Vercise DBS Mode D'emploi

Turning Stimulation On and Off for Individual
Areas
To turn ON stimulation for an Area:
1
Make sure the Area you wish to turn on is selected.
To select an Area, see the "Selecting an Area" section of this manual.
Note: To initially turn on stimulation for an area, that area must first be
configured with at least one cathode.
2 Click the
To turn OFF stimulation for an Area:
1 Make sure the Area you wish to turn off is selected.
To select an Area, see the "Selecting an Area" section of this manual.
2 Click the
button of the selected area to turn stimulation ON.
button of the selected Area to turn stimulation OFF.
Programming the Patient
Vercise™ DBS Programming Manual
91053785-17 25 of 1705