Stimulation Level Control - Boston Scientific SC-5210 Manuel

Patient System Handbook
Note: Remember, the Level screen will remain on the display for approximately one minute if you do not press a button to perform
an action with the Remote Control. After a minute, the Remote Control will go into idle mode and the display will go blank.
• Multiple area control is available only if your system has been programmed to deliver stimulation to separate areas. If you do
not have separate area control (for example, left leg vs. right leg) but feel that separate control might improve your therapy,
contact your healthcare professional to determine what is possible.

Stimulation Level Control

Occasionally, you may see one of the accompanying messages on the Remote Control screen while changing the stimulation level.
These displays, and a "beep" from the Remote Control, alert you that you have reached either a maximum or a minimum level:
Patient System Handbook
9055960-003 REV B 16 of 233