Remote Control Display Messages - Boston Scientific Precision SC-5213 Manuel D'utilisation

Precision™ SCS System with MultiWave Technology Patient System Handbook
Stimulation Shuts Off
1. When the Stimulator battery needs to be recharged, it will stop stimulating. Check the battery status with the Remote Control
and recharge if necessary, then turn stimulation back on. If the Stimulator regularly stops stimulating before you charge, you can
charge more often.
2. Although unlikely, anti-theft screeners can turn stimulation off. If you cannot turn the stimulator back on with your Remote Control,
you may need to charge the Stimulator.
3. Large magnetized speakers or large power lines that emit interference may also turn off stimulation. If you cannot turn the
stimulator back on with your Remote Control, you may need to charge the Stimulator.

Remote Control Display Messages

"Remote Battery Low" on the Display
The batteries in your Remote Control should be replaced soon. All of the Remote Control functionality is still available (refer to
"Battery Replacement" on page 28).
Patient System Handbook
90868426-08 REV A 36 of 213