Tips For Aligning The Charger - Boston Scientific Precision SC-5213 Manuel D'utilisation

7

Tips for Aligning the Charger

1. Lightly press on your skin until you find the implanted Stimulator.
Note: If you still have stitches or staples in place from your implant surgery, feel through your bandages, not directly on the skin, to
avoid infection.
Press the Power Button on the Charger. The Charger will begin beeping continuously to signal that it is searching for the Stimulator.
2. Place the Charger to the left of the Stimulator.
3. Slowly move the Charger to the right, towards the Stimulator.
4. Stop moving the Charger when it stops beeping.
5. Make a mark on your skin with a soft-tipped marker at the right edge of the Charger.
6. Place the Charger to the right of the Stimulator.
7. Slowly move the Charger to the left, towards the Stimulator.
Patient System Handbook
90868426-08 REV A 40 of 213