Boston Scientific Precision SC-5213 Manuel D'utilisation page 11

Safety Information
In some cases, the skin over your Stimulator may become very thin over time. If this occurs, contact your physician.
Lead Location. In some instances a lead can move from its original location, and stimulation at the intended pain site can be lost.
If this occurs, consult your physician who may able to restore stimulation by reprogramming the Stimulator in the clinic or repositioning
the lead during another operation.
Device Failure. Stimulators can fail at any time due to random component failure, loss of battery functionality, or lead breakage.
If the device stops working even after complete charging (up to four hours), turn off stimulation and contact your physician so that the
system can be evaluated.
Storage, Handling and Transport. Do not expose the Remote Control or Charging System components to excessively hot
or cold conditions. Do not leave the devices in your car or outdoors for extended periods of time. The sensitive electronics can be
damaged by temperature extremes, particularly high heat. For proper operation, do not use the Charger if the ambient temperature is
above 35° C (95° F).
If the Remote Control or the Charging System is to be stored for a period of time, be careful that the storage temperature does not
exceed -20–60° C (-4–140° F).
Handle the system components and accessories with care. Do not drop them or submerge them in water. Avoid all sources of water
that can come into contact with the devices. Although reliability testing has been performed to ensure quality manufacturing and
performance, dropping the devices on hard surfaces or in water, or other rough handling, can permanently damage the components.
(See "Limited Warranty" on page 43.)
Component Disposal. Do not dispose of the Remote Control or Charger in fire. The battery in these devices can explode in
fire. Dispose of used batteries in accordance with local regulations. The Stimulator should be explanted in the case of cremation, and
returned to Boston Scientific. External devices to be disposed of per local regulatory requirements. Please contact your healthcare
professional for information.
Remote Control, Charging System Cleaning. The components can be cleaned using alcohol or a mild detergent applied
with a cloth or tissue. Residue from soapy detergents should be removed with a damp cloth. Do not use abrasive cleansers for
cleaning.
Cell Phones. While we do not anticipate any interference with cell phones, the full effects of interaction with cell phones are
unknown at this time. If there is a concern or a problem is encountered, the physician should be contacted.
Patient System Handbook
90868426-08 REV A 9 of 213