John Bean b 9200 Manuel D'utilisation page 94

94
7.1.1-7
7.1.1-8
7.1.1-9
Trouble shooting
H28 - Figure 7.1.1-7
The gauge arm was moved too slowly.
• Return the gauge arm to the starting position and
repeat the operation, moving it towards the weight
application point again.
H80 - Figure 7.1.1-8
Recalibration was not set up. As a result, it cannot be
performed by the operator.
• Press the "STOP" key to clear the message.
• Call the service team for machine calibration.
H82 - Figure 7.1.1-9
The self-test was disturbed (e.g.: by turning the wheel).
The message is displayed for 3 seconds, then the
measurement is:
• repeated (max. 10 times) or
• aborted by pressing the "STOP" key.
Operator's Manual b 9200