John Bean b 9200 Manuel D'utilisation page 92

92
7.1.1-1
7.1.1-2
7.1.1-3
7.1.1-4
7.1.1-5
7.1.1-6
Trouble shooting
H0 - Figure 7.1.1-1
Wheel silent running cannot be improved with balancing
optimisation.
H1 - Figure 7.1.1-2
Further optimisation is not recommended but is
possible.
H2 - Figure 7.1.1-3
Weight minimisation is recommended, further
optimisation does not bring improvements.
H20 - Figure 7.1.1-4
Correction plane cannot be found with the gauge arm
for measuring offset and diameter.
• Measure the correction plane and set the dynamic
imbalance indicator.
H21 - Figure 7.1.1-5
The position reached does not correspond to the
correction plane, in which the stick-on weight must be
applied with the gauge arm.
• Turn the wheel to the position for application of the
stick-on weight on the relative correction plane.
H26 -Figure 7.1.1- 6
The gauge arm was moved too quickly.
• Return the gauge arm to the starting position and
repeat the operation, making it approach the weight
application point slowly.
Operator's Manual b 9200