John Bean b 9200 Manuel D'utilisation page 74

74
5.6-3
5.6-4
5.6-5
5.6-6
Operation
Code C0
Figure 5.6-3 setting operating modes preset by the
manufacturer
0* = No action
1 = Set values preset by the manufacturer (state
1 is displayed only briefly)
The operating mode selected can be obtained from the
permanent memory.
Code C1
Figure 5.6-4 Selecting the definition of the imbalance
value in steps of 1 or 5 grams (= 0.05 or 0.25 oz.).
0* = 5 gram (0.25 oz) definition
1 = 1 gram (0.05 oz) definition
The operating mode selected can be obtained from the
permanent memory.
Code C2
Figure 5.6-5 Selecting the suppression of minor
imbalance values.
0* = Suppression OFF
1 = Suppression ON
The operating mode selected can be obtained from the
permanent memory.
Code C3
Figure 5.6-6 Selecting the unit of measure for indicating
the imbalance (grams/oz) activated after the machine
has come on.
0* = Value in grams
1 = Value in oz
The operating mode selected can be obtained from the
permanent memory.
*=preset by the manufacturer
Operator's Manual b 9200