John Bean b 9200 Manuel D'utilisation page 80

80
5.6-13
5.6-14
5.6-15
Operation
Code C14
Figure 5.6-13 User recalibration.
See description in 5.5.1 User Calibration.
Code C21
Figure 5.6-14 This displays the program version number
and the model number.
Program version 2.9.3.
•
= to display the program version number press
the "C" key.
•
= to display the model number press the "C"
key and then press the "F" key.
Code C28
Figure 5.6-15 Selecting one of 10 messages from the
error memory and deleting them from the error memory.
The last 10, unrepeated error messages are saved in
the error memory so that the balancer user can trace
malfunctioning via remote diagnosis. The last error
message is saved in the nr.1 memory slot. The previous
messages are stored in order of arrival in the memory
list.
•
= Select one of the 10 error messages.
•
= Press the OP key to display the number of
the error message (left) and the total number
of times the message has appeared (right),
e.g. the error in memory slot 7 has appeared
4 times.
•
= For the 2nd step press the C key.
•
= Press and hold down the Fine key, spin the
wheel and set the relevant code:
0 = Do not delete the error memory
1 = Delete the error memory
Operator's Manual b 9200