Manual Mowing; Docking The Robotic Mower - Viking MI 632 Manuel D'utilisation

● Ending mowing manually:
A running mowing operation can be
ended at any time using the STOP
button. ( 5.1)
A running mowing operation can also
be ended immediately using the Home
button on the docking station. (
MI 632 C, MI 632 PC:
The mowing operation can also be
ended using the app – send the robotic
mower to the docking station. (
If necessary, the robotic mower
charges the battery in the interim
and then continues the mowing
operation until the selected end
time.
Secondary areas:
● Carry or steer the robotic mower to the
secondary area.
● Activate the secondary area. (
● Immediate mowing:
Call up the Start mowing command
( 11.5) or press the Mow button.
The mowing operation starts
immediately and continues until the
selected time.
● Time-delayed mowing:
Call up the command Start time-
delayed mowing. ( 11.5)
The mowing operation starts at the
selected start time and continues until
the selected end time.
0478 131 9933 A - EN
● Ending mowing:
When the selected end time is reached,
the robotic mower travels to the
perimeter wire and comes to a
standstill. Return the machine to the
docking station to recharge the battery
13.1) and confirm the displayed message.
( 24.)
A running mowing operation can be
ended manually at any time using the
10.) STOP button. (
If the battery runs flat before the
selected end time, the mowing
operation is shortened accordingly.

15.6 Manual mowing

The impact sensor and edge
limitation are disabled during
manual mowing.
11.14)
● Charge the battery if necessary
( 15.8)
● Remove the control panel (
● Activate the Hand control command
( 11.5)
● Move and steer the robotic
mower using the control pad.
Two forward speeds are
available:
Slow – press button lightly
Fast – press button firmly
● Always ensure sufficient distance
between the mowing deck and your feet
before activating the mowing blade –
always walk behind the robotic mower.
( 4.2)
● To activate the mowing blade,
press and hold the OK button
with your right thumb, then press
the Mow button with your left
thumb. The mowing blade rotates
for as long as the Mow button is
pressed.
● During manual mowing, keep the Mow
button pressed down with your left hand
and operate the control pad with your
5.1)
right hand.
● To deactivate the mowing blade,
release the Mow button.
● Charge the battery after manual
mowing. (

15.7 Docking the robotic mower

Docking during automatic operation:
The robotic mower automatically travels to
the docking station when the active time
ends or when the battery is discharged.
15.2)
Forcing docking:
● If necessary, insert the control panel
(
● If necessary, switch on the
docking station (
● Activate the command Drive to
docking station. (
During a mowing operation, the
Home button on the docking
station can be pressed as an
alternative.
● MI 632 C, MI 632 PC:
Send the robotic mower to the docking
station in the app. (
● No LED must illuminate on the docking
station after docking. (
15.8)
15.2)
13.1)
11.5)
10.)
13.1)
141