Automatic Mowing; Mowing Independently Of Active Times - Viking MI 632 Manuel D'utilisation

the size of the mowing area during
installation or during the creation of a new
mowing plan.
The active times and the mowing
duration can be changed individually, the
required mowing operations themselves
are automatically distributed over the
possible active times. If required, several
mowing or charging operations can run
during an active time. If required, the edge
of the mowing area can be cut
automatically at regular intervals.
( 11.14)
Up to three different active times per day
are possible. ( 11.6)
If the robotic mower has to travel to
specific areas of the mowing area, starting
points must be defined. (
Under certain circumstances (e.g.
warm weather or generous time
window), not all the active times
may be necessary for optimal lawn
care.
Changing the active times: (
– Additional active times for further
mowing operations.
– Adapting the time window in order, for
example, to prevent mowing during the
morning or night.
– Omitting individual active times
because the mowing area is e.g. being
used for a party.
Extending the mowing duration: (
– There are areas which are not mown
sufficiently, e.g because the mowing
area has lots of corners.
– Intensive grass growth during the
growing period.
– Particularly dense lawn.
140
Reduction of the mowing duration:
( 11.8)
– Reduced grass growth due to heat, cold
or dryness.
Creation of a new mowing plan: (
– The size of the mowing area has been
changed.
New installation: (
– New location of the docking station.
– Initial operation on a new mowing area.

15.4 Automatic mowing

● Switching on automatic
mowing:
11.15)
When automatic mowing is
switched on, the Automatic
symbol appears next to the battery
symbol in the display. (
● Starting mowing operation:
The mowing operations are
automatically distributed between the
11.7)
available active times. (
● Ending mowing operation:
When the battery is discharged, the
robotic mower automatically travels
back to the docking station. (
A running mowing operation can be
ended manually at any time using the
STOP button. (
A running mowing operation can also
be ended immediately using the Home
11.8)
button on the docking station. (
MI 632 C, MI 632 PC:
The mowing operation can additionally
be ended using the app – send the
robotic mower to the docking station.
( 10.)
11.8)
15.5 Mowing independently of active
times
● Activate the robotic mower upright in
11.14)
Mowing areas with docking station:
● In order to mow a part of the mowing
● Immediate mowing:
11.5)
● Time-delayed mowing:
14.3)
15.7)
● MI 632 C, MI 632 PC:
5.1)
13.1)
Mowing areas that the robotic
mower reaches via a corridor are
only mown if starting points have
been defined in the relevant area.
the docking station. This also activates
the docking station.
area that can only be reached via a
corridor, carry or steer the robotic
mower there.
Call up the Start mowing command
( 11.5) or press the Mow button.
The mowing operation starts
immediately and continues until the
selected time.
Call up the command Start time-
delayed mowing. ( 11.5)
The mowing operation starts at the
selected start time and continues until
the selected end time.
Start mowing using the app. (
The mowing operation starts at the
selected start time and continues until
the selected end time.
0478 131 9933 A - EN
10.)