Viking MI 632 Manuel D'utilisation page 154

– Recommendations are awarded
the priority "Low" or "Info", they
appear in the status screen alternately
with the text "iMow ready for op.".
The robotic mower can still be
operated, automatic operation
continues.
– Faults are awarded the priority
"Medium" and require action on the
part of the user.
The robotic mower can only be
operated again once the fault has been
rectified.
– In the cases of Errors awarded the
priority "High" the text "Contact
your specialist dealer" appears in the
display.
The robotic mower can only be
operated again once the fault has been
rectified by a VIKING specialist dealer.
If a message is still active despite
the proposed remedial action,
please contact your VIKING
specialist dealer.
Faults that can only be rectified by
a VIKING specialist dealer are not
listed in the following. Should a fault
of this kind occur, please
communicate the 4-digit fault code
and the fault text to your specialist
dealer.
MI 632 C, MI 632 PC:
Messages that impair normal
operation are also reported to the
app. ( 10.)
The robotic mower enters standby
after the message is sent and
disables radio communication to
preserve the battery.
152
Message:
0001 – Data loss
Press OK to release
Possible cause:
– The machine software has been
updated
– Voltage loss
– Software or hardware error
Remedy:
– After the OK button is pressed, the
robotic mower operates with the default
settings – check and correct the
settings (date, time, mowing plan)
Message:
0100 – Battery discharged
Charge battery
Possible cause:
– Battery voltage too low
Remedy:
– Place the robotic mower in the docking
station to recharge the battery (
Message:
0180 – Temperature low
Temperature range not reached
Possible cause:
– Temperature inside the robotic mower
too low
Remedy:
– Warm up the robotic mower
Message:
0181 – Temperature high
Temperature range exceeded
Possible cause:
– Temperature inside the robotic mower
too high
Remedy:
– Allow the robotic mower to cool down
Message:
0183 – Temperature high
see message 0181
Message:
0185 – Temperature high
see message 0181
Message:
0186 – Temperature low
see message 0180
15.8)
Message:
0187 – Temperature high
see message 0181
Message:
0302 – Drive motor fault
Temperature range exceeded
Possible cause:
– Temperature in left drive motor too high
Remedy:
– Allow the robotic mower to cool down
0478 131 9933 A - EN