Completing Initial Installation - Viking MI 632 Manuel D'utilisation

The active times for Monday are
displayed and the menu item
Confirm active times is enabled.
All the active times are confirmed
with OK and the next daily plan is
displayed.
In the case of small mowing areas,
not all the week days are used for
mowing. In this case, no active
times are displayed and the menu
item "Delete all active times" is
omitted. Days without active times
must also be confirmed with OK.
The displayed active times can be
changed. For this purpose, select
the required time interval using the
control pad and open with OK. (
If additional active times are
required, select the menu item
New active time and open with OK.
Specify the start and end times of the new
active time in the selection window and
confirm with OK. Up to three active times
per day are possible.
If all the displayed active times are to
be deleted, select the menu item
Delete all active times and confirm
with OK.
0478 131 9933 A - EN
The mowing plan is displayed after
the active times for Sunday have
been confirmed.
The displayed mowing plan is
confirmed with OK and the final step
of the installation assistant is called
11.7)
up.
If changes are necessary, select Change
and individually adapt active times.
During the active times, third
parties must keep out of the danger
area. The active times should be
adapted accordingly.
Moreover, the applicable local
regulations on the use of robotic
mowers as well as the information
in the "For your safety" (
section must be observed and the
active times changed accordingly in
the "Mowing plan" menu as
required, either immediately or after
completion of initial installation.
( 11.6)
In particular, you should check the
times of the day and night at which
it is permissible to use the machine
with the responsible authorities.

9.12 Completing initial installation

Remove all foreign bodies (e.g.
toys, tools) from the mowing area.
Complete initial installation by
pressing the OK button.
6.)
115