Charging The Battery; Automatic Charging - Viking MI 632 Manuel D'utilisation

After docking, no further mowing
operation takes place in the current
active time.
Manual docking:
● Steer the robotic mower to the docking
station using the control panel – remove
the control panel for this purpose
( 15.2) and activate the Hand
control ( 11.5) command.
or
● Push the robotic mower into the
docking station by hand.
Lift the robotic mower slightly by the
carrying handle (1) and relieve the weight
on the drive wheels. Push the machine,
resting on its front wheels, into the docking
station.
● Insert the control panel (
● No LED must illuminate on the docking
station after docking. (
142

15.8 Charging the battery

Only charge the battery via the
docking station.
Never remove the battery and
charge it using an external charger.

Automatic charging:

During mowing, charging occurs
automatically when the robotic mower
docks into the docking station at the end of
the mowing operation.
No LED must illuminate on the
docking station after docking.
(
Starting charging manually:
● Following use in secondary areas,
return the robotic mower to the mowing
area and dock it. (
● Dock the robotic mower following
interruption of a mowing operation.
( 15.7)
● If necessary, end standby mode of the
robotic mower by pressing a button.
Charging starts automatically.
Charging:
During charging, the text "Charging
battery" is displayed in the status
screen.
A plug symbol appears instead of
the battery symbol in the information
15.2)
area of the display in all the other
menus.
13.1)
The charging time varies and is
automatically adapted to the subsequent
period of use.
13.1)
15.7)
In the event of charging problems,
a corresponding message appears
in the display. ( 11.9)
The battery is only charged when
the voltage falls below a certain
value.
Charge state:
The momentary charge state can be
seen in the status screen when the
relevant display is selected.
( 11.13)
In all other menus, the battery
symbol in the information area of
the display serves to indicate the
charge state. ( 11.3)
0478 131 9933 A - EN