Commands; Mowing Plan - Viking MI 632 Manuel D'utilisation

3. Time:
The current time is indicated in 24 hour
format.
4. Mobile radio signal:
The signal strength of the
mobile radio connection
(GPRS) is indicated using 4
bars. The more bars visible,
the better the reception.
A reception symbol with a
small x indicates that there is
no connection with the
Internet.
A question mark is shown
during initialisation of the radio module
(checking hardware and software – e.g.
after switching on the robotic mower).
11.4 Main menu
The main menu is displayed,
– when the status screen (
is quit by pressing the OK button,
– when the "Main menu" command is
activated,
– when the Back button is pressed in the
second menu level.
120

1. Commands (

Main menu
Lock iMow
Switch automatic mowing on/Switch
automatic mowing off
Drive to docking station
Hand control
Start mowing
Start time-delayed mowing
Skip next active time
Edge mowing

2. Mowing plan (

Daily plan
Weekly plan
3. Information (
Messages
Events
iMow status
Lawn status
Radio module status (MI 632 C,
MI 632 PC)
4. Settings (
iMow
Installation
Safety
Service
Dealer area
11.5 Commands
11.2)
11.5)
11.6)
11.9)
11.10)
Select the required command using the
control pad and execute by pressing OK.
1. Main menu
2. Lock iMow
3. Switch on automatic mowing/Switch off
automatic mowing
4. Drive to docking station
5. Hand control
6. Start mowing
7. Start time-delayed mowing
8. Skip next active time
9. Edge mowing
1. Main menu:
Return to the main menu by
pressing OK.
2. Lock iMow:
Activate disabling device.
Press the illustrated button
combination to unlock. (
3. Switch on automatic
mowing/
Switch off automatic mowing:
When automatic mowing is
switched on, the text "Automatic switched
on" appears in the status screen and the
automatic symbol is displayed next to the
battery symbol in the menus. The robotic
mower mows the mowing area fully
automatically.
When automatic mowing is switched
off, the text "Automatic switched off"
appears in the status screen and the active
times are shown as inactive (greyed out) in
the mowing plan. The mowing area is not
mown automatically. Mowing operations
can be initiated via the commands "Start
mowing" or "Start time-delayed mowing".
0478 131 9933 A - EN
5.2)