Viking MI 632 Manuel D'utilisation page 129

The docking station is
defined as starting point 0;
mowing operations are
started from here as standard.
The starting frequency corresponds
to the calculated residual value of
10 of 10 operations.
11.16 Safety
1. Disab. device
2. Level
3. GPS protect. (MI 632 C, MI 632 PC)
4. Change PIN code
5. Start signal
6. Alarm signal
7. Menu signal
8. Child lock
9. Keylock
10.Link iMow and dock
1. Disab. device:
The disabling device is activated
with OK; the robotic mower can no
longer be operated.
The robotic mower must be disabled prior
to any maintenance or cleaning work, prior
to transportation and prior to inspection.
( 5.2)
● To deactivate the disabling
device, press the illustrated
button combination (Mow button
and OK button).
2. Level:
Four safety levels can be set;
various locks and safety devices are
activated, depending on the level.
0478 131 9933 A - EN
– None:
The robotic mower is unprotected.
– Low:
Anti-theft alarm is active; PIN code
must be entered for linking the robotic
mower and docking station as well as
for resetting the machine to the default
settings.
– Medium:
Same as for "Low", however, the time
lock is also active.
– High:
Same as for "Medium", however,
settings can also only be changed
following entry of the PIN code.
VIKING recommends that the
"Low", "Medium" or "High" safety
levels be set.
● Select the required level and confirm
with OK; enter the 4-digit PIN code if
necessary.
Anti-th. alarm:
If the mower is lifted or tilted by the handle
for longer than 10 seconds, the PIN query
appears. If the PIN code is not entered
within one minute, an alarm sounds and
automatic operation is switched off.
Connection lock:
PIN code query prior to linking of the
robotic mower and docking station.
Reset lock:
PIN code query prior to resetting the
machine to the factory defaults.
Time lock:
PIN code query for changing a setting if no
PIN code has been entered for more than
one month.
Setting prot.:
PIN code query when settings are
changed.
3. GPS protect.:
(MI 632 C, MI 632 PC):
For switching position monitoring on
and off. ( 5.10)
VIKING recommends always
switching on GPS protection.
Before switching on, enter the
mobile phone number of the
owner in the app ( 10.) and set
one of the safety levels "Low",
"Medium" or "High" on the robotic
mower.
4. Change PIN code:
The 4-digit PIN code can be
changed if required.
The "Change PIN code" menu item
is only displayed in the safety levels
"Low", "Medium" or "High".
● First enter the old PIN code and confirm
with OK.
● Then enter the new 4-digit PIN code
and confirm with OK.
VIKING recommends making a
note of the changed PIN code.
If the PIN code is entered
incorrectly 5 times, a 4-digit master
code is required, otherwise
automatic operation is switched off.
For the creation of a master code,
you must provide your VIKING
specialist dealer with the 9-digit
serial number and the 4-digit date,
which are displayed in the selection
window.
5. Start signal:
For switching on and off the acoustic
signal that sounds when the mowing
blade is activated.
127