Cot Fastener Installation - Stryker Power Pro Cot 6500 RUGGED Manuel D'utilisation

Cot Fastener Installation

The Stryker Cot Fastener systems are designed to be compatible only with cots which conform to the installation
specifications listed on page 20.
WARNING
It is the responsibility of the cot operator to ensure that the cot being used in the Stryker Cot Fastener System meets
the installation specifications listed on page 20. Injury may result if a non-compatible cot is used in the Stryker Fastener
System.
NOTE
Adjustment of the rail clamp assembly may be required in order to compensate for any variation in the cot retaining post
position depending on the ambulance cot manufacturer and model number.
For more detailed instruction and operation instructions for the Stryker Cot Fastener systems, refer to part number 6370-
090-010 Cot Fastener Installation/Operation Instructions.
www.stryker.com 6500-009-005 REV A 19