Stryker Power Pro Cot 6500 RUGGED Manuel D'utilisation page 30

Pedi-Mate™ Infant Restraint System Attachment Instructions (Continued)
5. Pull firmly on the end of the adjustable backrest strap and tighten it securely.
6. Insert the mainframe straps between the cot frame and the mattress. To ensure the release button is toward the foot
end of the cot, insert the buckle behind the litter crossbrace and bring it up in front of the crossbrace. Secure the
buckle around the crossbrace, leaving a little slack in the strap for final adjustment (see Figure 23).
Figure 23 - Securing the Safety Restraints on a
WARNING
To avoid accidental release of the Pedi-Mate™, and possible injury to the infant, ensure the buckle is located away from
obstructions on the cot.
7. Verify all the straps are snug and fastened securely (see Figure 24).
NOTE
These are general instructions for installation of the Pedi-Mate™. Safe and proper use of the Pedi-Mate™ is solely at the
discretion of the user. Stryker recommends all users be trained on the proper use of the Pedi-Mate™ before using it in
an actual situation.
Retain these instructions for future reference. Include them with the product in the event of transfer to new users.
Pedi-Mate™ is a trademark of Ferno-Washington Inc.
2
Cot Features
Figure 24- Pedi-Mate™ Strapped to a
6500-009-005 REV A
Cot
Cot
www.stryker.com