Cot Features; Using Restraint Straps - Stryker Power Pro Cot 6500 RUGGED Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 83

Using Restraint Straps

WARNING
Always use all restraint straps to secure the patient
on the cot. An unrestrained patient may fall from
the cot and be injured.
Always secure the patient on the cot with all the
restraint straps. Buckle the restraints across the
patient's chest/shoulders, waist and legs (Figure
14). Keep the restraint straps buckled when the cot
is not being used with a patient to avoid damage to
the buckles and straps.
WARNING
Do not attach restraints to the base or cross-
tubes, improper restraint attachment could result
in damage to the cot further resulting in injury to
the patient or operator.
Figure 15 - Head Section Restraints
Wrap the strap around the cot frame and back through the loop on the end of the strap as shown in Figures 15 and 16.
The arrows indicate alternate attachment areas.
When attaching the restraint straps to the cot, remember the attachment points should provide both strong anchorage and
proper restraint position while not interfering with equipment and accessories.
2

Cot Features

Figure 14 - Safety Restraints
Figure 16 - Foot Section Restraints
6500-009-005 REV A
www.stryker.com

Publicité

Table des Matières
loading

Table des Matières