Introduction; Specifications - Stryker Power Pro Cot 6500 RUGGED Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 83

INTRODUCTION

This manual is designed to assist you with the operation and maintenance of the
Ambulance Cot. Read it thoroughly before using the equipment or beginning any maintenance on it.

SPECIFICATIONS

Maximum Cot Load Capacity
Maximum Unassisted Lift Capacity
Backrest Articulation/Shock Position
Overall Length/Minimum Length/Width
Height
1
Weight
2
Caster Diameter/Width
Minimum Operators Required for Loading/Unloading an
Occupied Cot
Minimum Operators Required for Loading/Unloading an
Unoccupied Cot
Recommended Fastener Systems
Recommended Loading Height
Roll-In Style
Single Wheel Lock / Double Wheel Lock
Hydraulic Oil
Battery System
- Battery
- Charger
1
Height measured from bottom of mattress at seat section to ground level.
2
Cot is weighed with 1 battery and without mattress and restraints.
3
Cot may be set to any ambulance deck height ranging from 26" to 36" (66 cm to 91 cm).
Stryker reserves the right to change specifications without notice.
The POWER PRO XT is designed to conform to the Federal Specification for the Star-of-Life Ambulance (KKK-A-1822E).
The POWER PRO XT is designed to be compatible with competitive cot fastener systems.
D
WALT
®
is a registered trademark of Black & Decker Inc.
e
Patents pending.
www.stryker.com
Introduction
3
6500-009-005 REV A
700 pounds (315 kg)
500 pounds (225 kg)
2° to 73° / +15°
81" / 63" / 23" (206 cm /160 cm / 58.5 cm)
Adjustable from 14" to 41 1/2" (35,5 cm to 105 cm)
122 pounds (54.5 kg)
6" / 2" (15,2 cm / 5,1 cm)
2
1
Model 6370 or 6377 Floor Mount Type
Model 6371 Wall Mount Type
Adjustable up to 36" (91 cm)
Yes
Optional
Stryker Part Number 6500-001-293
D
WALT
24 Volt NiCd Battery
®
e
Stryker Part Number 6500-700-006
Stryker Part Number 6500-070-000 (120 Volt)
Part Number 6500-072-000 (12/24 Volt)
POWER PRO XT


Publicité

Table des Matières
loading

Table des Matières