Stryker Power Pro Cot 6500 RUGGED Manuel D'utilisation page 40

Operating the 2-Stage IV Pole (Optional Equipment)
Figure 35 - 2-Stage IV Pole Storage Position
1. Lift and pivot the pole from the storage position and push down until it is locked into receptacle (A).
2. To raise the height of the pole, turn the lock actuator (B) counterclockwise and pull up on the telescoping portion (C)
of the pole to raise it to the desired height.
3. Turn the lock actuator (B) clockwise to lock the telescoping portion in place.
4. Hang the IV bags on the IV hook (D).
CAUTION
To avoid damage to the IV pole, the weight of the IV bags or equipment must not exceed 40 pounds (18kg).
5. Turn the lock actuator (B) counterclockwise and slide section (C) into the bottom tube.
6. Lift up and pivot the pole down into the storage position.

Cot Features
6500-009-005 REV A
C
D
B
A
Figure 36 - 2-Stage IV Pole
www.stryker.com