Publicité
Cakes high in middle with crack on
top
Piecrust edges too brown
COOKTOP
PROBLEM
Heating elements and
controls do not work.
Heating elements do
not heat properly.
Heating elements cycle
off even when elements
are turned to their
highest settings.
Glass ceramic surface is
see through or appears
to be red in color.
• Oven temperature too high
• Baking time too long
• Pans touching each other or oven walls
• Incorrect rack position
• Pan size too small
• Oven temperature too high
• Edges of crust too thin
POSSIBLE CAUSE
Fuse is blown or circuit
breaker is tripped.
No electricity to the
cooktop.
Improper cookware is being
used.
Heating element
temperature limiters are
temporarily shutting off the
elements due o exceeding
the maximum allowable
temperature.
Under direct or bright
lighting, you will sometimes
be able to see through the
glass and into the chassis
due to its transparent
quality. You may also notice
a red tint under these
conditions
42
SOLUTION
Replace the fuse or reset the
circuit breaker. If the problem
continues, call an electrician.
Have electrician check your
power supply.
Select proper cookware. See
"Cookware."
If the problem continues, call for
service.
This is a normal operating
condition, especially during rapid
heat-up operations. The element
will cycle back on automatically
after it has cooled sufficien y.
These are normal properties of
black ceramic glass panels.
Publicité
