Publicité
USE AND OPERATION
The following screen appears on the display.
To change the cooling temperature you can:
– Turn the knob to increase or decrease until the desired
value is displayed, or use the numeric keypad.
3) Press OK to confi rm the desired value.
Multi-Timer
1) Press the Multi-Timer zone to activate or deactivate the
Multi-Timer function ("Multi-Timer On/Off ").
Depending on the chosen function, the functioning status
appears in the "Multi-Timer" area ("Multi-Timer On" or "Multi-
Timer OFF").
The following screen appears on the display.
This screen allows you to:
– Add a new Timer
– Edit an existing Timer
– Eliminate all the Timers
3413811_ut_GB_rev.2
Add a new Timer
1) Press the "+" zone to add a new Timer.
2) Enter the seconds, minutes and hour.
3) Select a colour, from those available in the drop-down
menu, to be associated with a certain time.
4) Press OK to save the selection made and exit.
Edit an existing Timer
1) Select a preset time by pressing the zone.
2) Edit the seconds, minutes and hour.
3) Press OK to confi rm the highlighted value.
ENGLISH
23
Publicité
