ENGLISH
To fi nd the specifi c topics of interest to you quickly, refer to the index at the start of the manual.
This manual contains all information necessary for general readers, i.e. for users of the appliance.
NOTE: This manual is updated to SW version 4.2.13.
– This manual, which forms an integral part of the appliance, to provide the necessary information for
those authorised to interact with it during its working life. As well as adopting good practices for use,
the manual's intended readers must read it thoroughly and apply its instructions to the letter.
– This information is provided by the manufacturer in the original language (Italian) and is translated
into other languages to meet legal and/or business requirements. Reading this information will avoid
health and safety risks to people and fi nancial losses.
– Keep this manual in a clearly identifi ed safe place throughout the working life of the appliance, so that
it will always be available when required for consultation.
– The manufacturer reserves the right to make changes without any obligation to provide any prior
notice.
IDENTIFICATION OF MANUFACTURER AND APPLIANCE
The nameplate shown here is fi tted directly to the
appliance. It contains references and all essential
information for operating safety.
A) Appliance model
B) Type of customisation
C) Manufacturer identifi cation
D) Insulation class
E) EC conformity mark
F) Serial number
Q
400V3N ~
For all requirements contact the agents or the headquarters of Angelo Po which can be found in the
contacts section of the website http://www.angelopo.com.
When requesting service, state the data provide on the nameplate and provide a description of the
fault.
10
GENERAL INFORMATION
INSTRUCTIONS AND WARNINGS FOR THE READER
PURPOSE OF THE MANUAL
A
B
C
A
Hz
kW
L
M
N
P
PROCEDURE FOR REQUESTING SERVICE
G) Protection rating
L) Voltage (V)
M) Absorption (A)
N) Frequency (Hz)
P) Rated power (kW)
Q) Test voltage indicator
R) Date of construction
S) WEEE Symbol
D E
F S
GENERAL INFORMATION
G
R
3413811_ut_GB_rev.2