Publicité
USE AND OPERATION
If "General settings" is selected, the following screen will
appear on the display, which allows you to select and/or
edit the parameters on the display.
If "User parameters" is selected, the following screen ap-
pears on the display, which allows you to select and/or edit
the parameters on the display after entering the password
provided by the manufacturer (APGC).
If "Cooking settings" is selected, the following screen will
appear on the display, which allows you to select and/or
edit the parameters on the display.
3413811_ut_GB_rev.2
If "Audio settings" is selected, the following screen will ap-
pear on the display, which allows you to select and/or edit
the parameters on the display.
If "LCD settings" is selected, the following screen will appear
on the display, which allows you to select and/or edit the pa-
rameters on the display.
If "Connectivity settings" is selected, the following screen
will appear on the display, which allows you to select and/or
edit the parameters on the display.
Select "impostazioni IP" (IP settings) and the display will
show the IP address assigned to the oven; select "impostazi-
oni IPv4" (IPv4 settings) to set a static IP address for the oven.
NOTE: The KIOT accessory (kit for remote connec-
tion to the oven) is available on request.
If "impostazioni Wi-Fi" (Wi-Fi settings) is selected, Wireless
connection must be enabled using the switch provided:
The "Wireless mode" screen off ers a choice between
"HOTSPOT" to create a Wireless network (in which case ac-
cess "Hotspot Confi guration", give a name to the new net-
work and enter a password) or "WIFI" to use an existing net-
work (access "Wi-Fi Confi guration" and enter the network
name and password).
ENGLISH
19
Publicité
