ENGLISH
2) Loosen the screws (C) to remove the LED protec-
tion (D).
3) Loosen the screws (E) to remove the LED (F).
WARNING: Do not direct jets of water di-
rectly at the LED.
4) Lift the terminal tabs (G) to disconnect the power
supply cables (H) of the LED.
5) Once the operation has been completed, remount
everything.
WARNING: Take care to correctly recon-
6)
nect the cables with the corresponding colours
(black/black, red/red).
APPLIANCE DECOMMISSIONING, DEMOLITION AND DISPOSAL
When decommissioning the appliance, a series of procedures must be carried out to ensure that the
appliance and its components are not a hindrance and are not easily accessible.
To ensure that the appliance cannot constitute hazards for people or the environment, all energy
sources (electricity, etc.) must be disconnected and rendered unusable, and any liquids present must be
drained (lubricants, fl uids, etc.).
Place the appliance in a suitable area which is not easily accessible, with barriers to prevent anyone from
accessing it.
When scrapping, sort all components by chemical characteristics and dispose of them separately in ac-
cordance with the relevant legal requirements.
IMPORTANT: Do not dump non-biodegradable products, lubricating oils, and non-metal-
lic components (rubber, PVC, resins, etc.) in the environment. Dispose of them in compliance with
the relevant laws.
16
C
C
C
E
H
G
F
E
REPLACING PARTS
D
C
H
G
3413811_inst_GB_rev.2