Publicité
ENGLISH
MAIN MENU
Used to access the program and display pages of the opera-
ting parameters of the equipment.
Press the icon to access the Main menu.
The following screen appears on the display.
Oven
selection
Manual cooking
Multi-ActO
multi-phase cooking
Special cooking
Cleaning
HACCP date
Notices
– "Manual cooking" function: used to enter the data (tem-
perature, cooking time, etc.) to allow cooking to be car-
ried out in "manual mode" (see page 20).
– "Multi-ActO" function: it is used to activate the function
to manage simultaneously stored cooking processes.
(see page. 27) .
– "Automatic cooking" function: used to recall the cook-
ing modality pre-set for the diff erent foods (see page 24).
– "Multi-step cooking" function: used to select, amend or
create cooking programs that involve multiple stages (see
page 26).
– "Special cooking" function: used to recall the particular
cooking modality (e.g. Smoking, pasteurisation, holding,
BT cooking, dry, delta T, vacuum, regeneration, favourites)
(see page. 27).
– "Cook&Chill" function: used to execute cooking in
combination with the blast chiller (only for BE-1 models).
18
Close and go
back to the
previous screen
Blast chiller
selection
Automatic cooking
Cook & Chill
Functions of
the Oven
Favorite
Scheduler
Settings
Service
Users
Modify dashboard
– "Washing" function: used to select the type of program
for cleaning of the appliance (see page 31).
– "Favorite" function: used to access the preferred cook-
ing programs (see page 36).
– "Scheduler function: used to program warnings or ac-
tivities (e.g. cooking programs) on certain days and at cer-
tain times (see page 36).
– "Notices" function: used to access the list of activities pro-
grammed through the "scheduler" function (see page 38).
– "HACCP Data" function: used to display the HACCP data
acquired during diff erent cooking (see page 37).
– "Settings " function: used to set the appliance's operat-
ing parameters (see 18).
– "Service" function: function for the exclusive use of the
After-Sales technical assistance service (to be used with
Password) (see page 37).
– "Users" function: used to select the active user or to
manage the list of users. Each user is associated with a
personalised homepage (see page 38).
– "Edit dashboard functions (home page): used to per-
sonalise the content of the Homepage. The homepage is
associated with the user who is active at that time (see
page 39).
– "Data upload/download" function: serves to upload/
download data from a memory unit external to the oven or
viceversa (see page 40).
– "IoT" function : IoT functionalities enable the connection
of the oven with the Angelo Po Cloud platform available at
apolink.angelopo.com (see page 41).
SETTINGS
Proceed as follows.
1) On the main menu screen, press the icon to access the
" Setting " function.
HACCP date
The following screen appears on the display.
Settings
Cooking Setting
User Parameters
Audio settings
LCD Settings
USE AND OPERATION
Settings
Service
Users
Modify dashboard
General Settings
Connectivity
Parameters
3413811_ut_GB_rev.2
Publicité
