Apach AP Serie Notice D'utilisation page 24

- AUTOMATIC COOLING COOKING CHAMBER – for panel with encoder
To reduce automatically the cooking chamber temperature press temperature button,
acting on the encoder reduce the temperature until desired, open the door and press the
encoder for confirmation. The oven will immediately reduce the temperature.
- AUTOMATIC COOLING COOKING CHAMBER – for panel with buttons
To automatically reduce the oven temperature, just press the temperature button and
set the desired temperature by using the "+" and "-" keys. Then confirm by pressing
the "SET" button. The oven will automatically activate the fans and start cooling the
oven. This feature also works with the door open and this reduces the temperature
very quickly.
AUTOMATIC CLEANING – for panel with encoder
-
The cleaning system is fully automatic: just select the required program.
With the control panel in the OFF mode, press the ENCODER knob.
The display will show CLN_01. Turn the ENCODER knob until the required function
appears. Press the ENCODER knob again and start the program.
CLN_01: SHORT cleaning cycle (45 minutes).
CLN_02: MEDIUM cleaning cycle (56 minutes).
CLN_03: LONG cleaning cycle (65 minutes).
CHr___: detergent pump refill (3 minutes).
The detergent pump refill with the CHr program must be carried out in the following cases:
upon first start up after installation.

 every time the detergent in the container runs out.
after a long period of non-use.

- AUTOMATIC CLEANING – for panel with buttons
The cleaning system is fully automatic: just select the desired program.
With the control panel in the OFF mode, press the "SET" key.
The display will show CLN_01. Press "+" and "-" until the required function appears.
Press the "SET" key again and start the program.
CLN_01: SHORT cleaning cycle (45 minutes).
CLN_02: MEDIUM cleaning cycle (56 minutes).
CLN_03: LONG cleaning cycle (65 minutes).
CHr: detergent pump refill (3 minutes).
The detergent pump refill with the CHr program must be carried out in the following
cases:
 At the first start up after installation.
Every time the detergent in the container runs out.

 After a long period of non-use.
E n g l i s h | 23