External Cleaning - Apach AP Serie Notice D'utilisation

For manual cleaning follow the procedure below:
Turn on the appliance and set the temperature to 80°C.
•
Leave it on for 10 minutes on steam
•
Turn off the appliance and let it cool down
•
•
Remove the side tray racks. Manually remove all removable residues place the removable
parts inside dishwashers.
•
To clean the cooking compartment use soapy warm water.
Subsequently, all surfaces must be thoroughly rinsed, being careful to ensure no
detergent residues remain.
To clean the oven external parts, use a damp cloth and a non-aggressive detergent.
•
Clean with hot water and soap then rinse.
•
It is strictly prohibited to wash the cooking chamber in cooking temperatures higher than 70°C,
scalding danger.
Daily cleaning of the oven cooking chamber lining must be carried out with a non-abrasive
detergent to guarantee its full function.
Use plastic bristles or a sponge soave in vinegar and warm water in case of dirt crusts.
Warning: residue fats possibly present in the cooking chamber could catch fire when using the
oven, hence it is advisable to remove them quickly.
Only use products recommended by the manufacturer of the appliance.

EXTERNAL CLEANING

Only use a damp cloth with warm water or products suitable for cleaning stainless steel. Do not
use acidic products or ammonia.
WARNING: the appliance should never be cleaned with high pressure water sprays.
GLASS INSIDE THE DOOR AND DOOR CLEANING
To clean the glass inside the door wait until the oven is completely cool. Simply unscrew the
upper and lower screws manually from the side of the handle that secures the steel profile to
the internal glass. Then rotate the glass.
The entire door can be cleaned thoroughly at this position, with the glass still hinged to the door.
REPLACING LIGHT LAMPS
WARNING: Strictly adhere to the following procedure
in order to avoid electrocution or damage to people:
Disconnect the electrical connection
•
of the oven and leave it to cool.
Take off the side grids that hold the
•
baking trays.
• Remove the cover "A", unscrewing
the 4 fixing screws.
Replace the lamp "B" with one
•
having the same characteristics.
Reposition the cover "A" and fix it
•
with the 4 screws previously
removed
Put the side grids back on ensuring
•
they are well fitted.
Should the glass lid be broken or damaged, do not use the oven until the lid is replaced (Contact
the Assistance Centre).
E n g l i s h | 12