Apach AP Serie Notice D'utilisation page 22

- COOKING PROGRAMS STORAGE – for panel with buttons
1) Program to load a cooking method already saved: if you want to use the saved
program, press the "cooking program" key and use keys "+" and "-" to select the
desired program number. Press the "SET" key to confirm.
Press the "START/STOP" key to start the set program.
2)
New cooking program: if you want to save the new program, press the "cooking
program" button and use keys "+" and "-" to go to the first number that flashes.
Press the "SET" key to confirm.
Now you can start to enter all the information for the first phase (temperature,
time, steam, etc.) and the light of LED 1 will turn on.
Press the "programs" key to go to the second phase (see the LED on position no.
2). Enter all the information for the second phase (temperature, time, steam, etc.)
and press the "programs" key to proceed to the third stage (see the LED in
position no.3).
Enter all the information for the third phase (temperature, time, steam, etc.) and
press the "programs" key to go to the fourth phase (see all 3 LEDs).
Enter all the information for the fourth phase (temperature, time, steam, etc.) and
press the "programs" key for 5 seconds until the display shows MEM (which
means that the program has been saved).
If the cooking process only involves 1 or 2 phases, when you have finished with
the settings (temperature, time, steam, etc.), press the "program" button for 5
seconds until the display shows MEM (which means that the program has been
saved).
DELETING A PHASE OR PROGRAM
-
1. If you wish to delete a phase from a program, you must: press the cooking
Programs button and, using the encoder, select the program number desired.
Confirm by pressing the encoder. Then press the Programs button until the desired
phase has been selected. Then press and hold the TIME button for more than 5
seconds.
2. If you wish to delete a program, you must: first delete all the phases (as described
in point 1). Then press the Program button for 5 seconds until MEM (it means that
the program has been memorized with the phases deleted) appears on the display.
- DELETING A PHASE OR PROGRAM
1. If you want to delete a phase from a program: press the "cooking program" key and
use the "+" and "-" buttons to select the desired program number. Press the "SET"
key to confirm. Then press "cooking program" until the desired phase has been
selected. Then press and hold the "TIME" button for more than 5 seconds.
2. If you wish to delete a program, you must: first delete all the phases (as described in
point 1). Then press the Program button for 5 seconds until MEM (it means that the
program has been memorized with the phases deleted) appears on the display.
- RETURN TO MANUAL COOKING MODE
To exit the program function and return to the MANUAL cooking mode, hold the
ENCODER knob down until the word "MAN" appears on the display.
- RETURN TO MANUAL COOKING MODE
To exit the program function and return to the MANUAL cooking mode, hold the "SET"
key down until the word "MAN" appears on the display.
E n g l i s h | 21
– for panel with encoder
– for panel with buttons
– for panel with encoder
– for panel with buttons