Models" Function - ModelCraft GT4 Notice D'emploi

v) "Models" function
This function permits naming up to 20 different models and
saving them with all the programmed inputs. You can, e.g.,
programme and save one and the same model several times
with different setups (e.g. „Setup dry" or „Setup wet"). Up to 13
characters can be used for the model name. Spaces count as
characters for this as well.
"Name":
Enter a name for the model. Tap the "Back" button to save the
new values and return to the previous menu.
"Select model":
Select the required model from the list. Tap the "Back" button
to activate the selected model and return to the previous menu.
"Copy model":
Select a model to be copied. Then, select a model to be over-
written with the new data. Tap the "Back" button to save the new
values and return to the previous menu.
The selected model is replaced by the copied model. All previous settings are thus deleted irrevocably.
"Reset model":
Select a model to be deleted. Confi rm that you really do want to delete the model. Tap the "Back" button to save the
new values and return to the previous menu.
Only the individual settings are deleted from the selected model, the memory for the model remains the
same.
82
Figure 33