Change Grip Shell" Function; Maintenance And Care; Disposal; General Information - ModelCraft GT4 Notice D'emploi

z) "Change Grip Shell" function
There are two different rubber grip handles for selection for best handling of the transmitter. For small hands, use the
„grip shell S", for larger hands, use the „grip shell L". The mark „S" or „L" is imprinted at the bottom of the grip shell.
Carefully lift them starting at the side to replace the grip shells. Use the loose grip shells and the hook shown there
as a reference.

16. Maintenance and care

From the outside, the remote control should only be cleaned with a soft, dry cloth or brush. Never use aggressive
cleaning agents or chemical solutions otherwise the surfaces of the housing may be damaged. When cleaning, do not
put too much pressure on the LC touchscreen display.
The product is maintenance free. Do not disassemble.

17. Disposal

a) General information
Electrical and electronic devices may not be disposed of in the household waste!
Dispose of the product at the end of its useful life in accordance with the applicable legal regulations.
Remove any battery packs and dispose these separately from the product.
b) Batteries and battery packs
You, as the end user, are legally (battery regulations) obliged to return all used batteries and battery packs. Disposal
by means of the household waste is not permitted!
Batteries/battery packs with hazardous content are identifi ed with the symbol shown here which indicates
a ban on disposal via the household waste. The names of the crucial heavy metals are: Cd=Cadmium,
Hg=Mercury, Pb=Lead (names are on the battery/battery pack e.g. under the waste bin symbol shown
on the left).
Used batteries/battery packs can be returned free of charge to the collection points in your community, to our branches
or anywhere where batteries/battery packs are sold.
In doing so, you fulfi l your legal obligation and make your contribution towards protecting the environment.
87