Verifying And Setting The Dual Rate Function For Steering - ModelCraft GT3 2.4GHz Notice D'emploi

e) Verifying and Setting the Dual Rate Function for Steering
Use the dual rate button for the steering function (see figure 1, item 2) to electronically reduce the maximum steering
deflections. For adjusting the steering links in the model, you first need to set the maximum possible steering deflec-
tion of 100% or verify the settings.
If you briefly press the button, the display switches from the operating display
to the dual rate display.
With each further press of the button, the dual rate value changed by one
percentage step.
By pressing the button in both directions, you can increase or decrease the
value.
If the button is pressed and held, the setting value changes continuously. The
adjustable value is between 0 and 100%.
If the display indicates 100%, maximum steering deflection is possible.
The set value is stored automatically.
Use the Enter or ESC button (see figure 2, item 11 or 12) to switch back to the
operating display after setting the 100 % value.
NO.
5.8
V
D/R
CH
95
%
D/R
CH
100
%
Figure 8
47