Reverse" Function - ModelCraft GT4 Notice D'emploi

"Boat mode":
"Brake mixing":
"Mixes":
"Display servos":
"Race timer":
"Keys function":
"Models"
"RX setup"
"System":
b) "Reverse" function
This function can be used to change the servo rotation direction
of all four channels (CH1 to CH4) as required. Depending on
the installation position and the steering in the model, it may be
necessary to change the direction of rotation of a servo.
For this, tap the switch to change the servo rotation direction
of the required channel from Normal (NOR) to Reverse (REV).
Boat mode
Brake mixer
Channel mixer
Display for position of all servo levers
Timer
Assignment of functions for trim buttons
Model management
Settings for the receiver
Settings for the transmitter
Figure 12
67