Subtrims" Function - ModelCraft GT4 Notice D'emploi

d) "Subtrims" function
Figure 14
This function enables you to make an individual setting for the middle position of the drive and steering servos. A slight
pull of the model to the left can be equalised/corrected with the help of trimming. This ensures correct straight forwards
steering when the control wheel on the transmitter is in the middle position.
Select the parameter to be changed to do this. Slide the regulator to the right or left to change the value to suit your
requirements. Tap the "Back" button to save the new values and return to the previous menu.
Note:
The additional channels CH3 and CH4 do not have any centre position like CH1 and CH2. The function „Subtrim"
infl uences the limit position of the servos CH3 and CH4 nevertheless. Together with the function „End Points", you can
individually set the end values for CH3 and CH4.
69