- Remove the control panel.
- Remove and replace the component.
- Reassemble all parts. For assembly, proceed in
reverse order.
REPLACING THE THERMOSTAT
- Remove the control panel.
- Remove the front panel.
- Remove the bulb from its seat on the well.
- Remove and replace the component.
- Reassemble all parts. For assembly, proceed in
reverse order.
REPLACING THE HEATING ELEMENT
- Remove the front panel.
- Remove and replace the component.
- Reassemble all parts. For assembly, proceed in
reverse order.
INDIRECT HEAT ELECTRIC BOILING PAN
REPLACING THE ENERGY REGULATOR, THE KNOB
AND THE INDICATOR LIGHT.
- Remove the control panel.
- Remove and replace the component.
- Reassemble all parts. For assembly, proceed in
reverse order.
REPLACING THE THERMOSTAT
- Remove the control panel.
- Remove the front panel.
- Remove the bulb from its seat on the well.
- Remove and replace the component.
- Reassemble all parts. For assembly, proceed in
reverse order.
REPLACING THE LEVEL RESISTOR AND THE
HEATING ELEMENT
- Remove the front panel.
- Remove and replace the component.
- Reassemble all parts. For assembly, proceed in
reverse order.
REPLACING THE PRESSURE SWITCH.
- Remove the front panel.
- Remove the control panel.
- Remove and replace the component.
- Reassemble all parts. For assembly, proceed in
reverse order.
22.
CLEANING THE INTERIOR
Check the condition of the inside of the appliance.
Remove any built-up dirt.
Check and clean the fumes exhaust system.
23.
MAIN COMPONENTS
DIRECT HEAT GAS BOILING PAN
- Gas valve
- Main burner
- pilot burner
- Thermocouple
- Igniter
- Solenoid fill valve
- Energy regulator
- Indicator light
- Control knob
- Safety thermostat
INDIRECT HEAT GAS BOILING PAN
- Gas valve
- Main burner
- pilot burner
- Thermocouple
- Igniter
- Solenoid fill valve
- Energy regulator
- Indicator light
- Control knob
- thermostat
- Pressure switch
- Water level resistor
DIRECT HEAT ELECTRIC BOILING PAN
- Solenoid fill valve
- Energy regulator
- Indicator light
- Control knob
- Safety thermostat
39