Télécharger Imprimer la page

Philips N1502 Mode D'emploi page 56

Publicité

54
Adjust the controls of the TV set to
get the best picture quality. If
necessary slowly adjust the
TRACKING
control on the VCR until
the picture is free from tracking
interference.
it is now necessary to check if the
programme on the TV set is that of
the test recording or if it is being
received directly via the aerial.
Press the STOP
bar.
If the programme shown on the TV set
changes (picture and/or sound) set
the ON/OFF/EJECT lever to the OFF
position and proceed directly to Step
1 on Page 58.
,
if there is no change in programme
oress the START key.
On the TV set, re-adjust the tuning
control until another programme is
shown on the TV set.
Again check if the programme being
shown is that of the test recording by
pressing the STOP bar.

Publicité

loading