Publicité
Set the slider switch of Tuning
Control 1 on the VCR to the same
group of channels as that of the first
pre-selector control on the TV set.
On the TV set, check the programme
on the first pre-selector control, then
switch back to the last pre-selector.
Adjust Tuning Wheel 1 on the VCR
until the programme on the television
screen is the same as that received by
pressing the first pre-selector of the
television. Finely tune with Tuning
Wheel 1 to get optimum picture
quality.
Press Pre-tuning Button 2 on the VCR.
Set Slider Switch 2 on the VCR to the
same channels as those of the second
pre-selector control on the TV set.
Adjust Tuning Wheel 2 until the
programme on the TV screen is the
same as that received by pressing the
second pre-selector control of the TV
set.
Set Tuning Controls 3, 4, 5, 6 and 7 in
turn to the respective controls of the
TV set.
Publicité
