Publicité
32
To return to normal playback
operation, first press the START key
and then press the STOP MOTION
button to release it.
At the end of the programme, press
the STOP bar, rewind the tape to the
beginning and then set the
ON/OFF/EJECT lever to the OFF
position.
After the mains indicator lamp goes
out, press the ON/OFF/EJECT lever
downwards (Ww), remove the cassette
and return the cassette to its case.
NOTE The recorded programme is fed
to your-TV set via a UHF modulator in
the VCR. It may happen that a TV
station in your area transmits on the
same channel.
in that case a programme is shown on
the TV set about one minute after the
VCR has been switched off.
Your dealer can adjust the VCR to
|
another modulator frequency in order
to assure the best picture quality of
the recorded programme.
Publicité
